Bayanin Samfura
Galvanized Karfe Coil Plate tare da murfin Z40 (40g/m² zinc a kowane gefe) kayan gini ne mai inganci wanda aka tsara don aikace-aikacen tsari da marasa tsari waɗanda ke buƙatar matsakaicin kariyar lalata. Kerarre ta hanyar zafi tsoma galvanization, karfe substrate (m karfe ko high-ƙarfi low-alloy karfe Layer) an rufi da tutiya Layer cewa bond metallurgically, forming kariya kariya daga tsatsa. Tare da kewayon kauri na 0.3-3.0mm da faɗin har zuwa 1500mm, wannan farantin murɗa yana ba da kyakkyawan walƙiya, tsari, da fenti. Rufin Z40 yana da kyau ga mahalli na cikin gida tare da ƙarancin zafi zuwa matsakaici, yana ba da mafita mai inganci don abubuwan da ba su da mahimmancin tsarin.
Siffofin
Daidaitaccen Kariyar Lalacewa : 40g/m² Tushen zinc (jimlar 80g / m²) yana ba da kariya ta shekaru 5-10 a cikin yankunan karkara, yana sa ya dace da aikace-aikace inda matsanancin lalata na bakin teku ko masana'antu ba damuwa bane.
High Mechanical Performance : Ƙarfin Samfuran ya fito daga 235MPa (misali) zuwa 550MPa (maki mai ƙarfi), yana tallafawa tsarin ɗaukar nauyi kamar purlins, girders, da trusses rufin.
Sauƙaƙe Ƙirƙirar : Kyakkyawan ductility da lanƙwasawa suna ba da izinin yanke, naushi, da yin juzu'i cikin bayanan martaba daban-daban ba tare da ɗigon sutura ba, musamman lokacin da aka yi amfani da ingantaccen magani.
Paintable Surface : Za'a iya zama madaidaicin shimfidar galvanized kuma ana iya sanya shi saman don ingantattun kayan kwalliya da kariya a cikin ƙarin mahalli masu tsauri, faɗaɗa haɓakar aikace-aikacen.
Magani na Tattalin Arziki : Ƙananan murfin zinc yana rage farashin kayan aiki yayin da yake kiyaye isasshen kariya ga abubuwan da ba su da mahimmanci.
Aikace-aikace
Abubuwan Tsari : Ana amfani da su don purlins, girts, da na biyu a cikin gine-ginen ƙarfe, suna ba da tallafi mai inganci tare da juriya mai matsakaici.
Roofing & Cladding : Ya dace da zanen rufin da aka ƙera da bangon bango a cikin karkara ko kewayen birni, galibi ana fentin su don daidaita launi.
Wuraren shinge & Guardrails : Yana kera shinge-link-ginan shinge, shingen gadi, da abubuwan sassaƙawa waɗanda ke buƙatar dorewa da sauƙi na shigarwa.
Gabaɗaya Ƙirƙirar : Mafi dacewa don kayan ƙarfe, ɗakunan ajiya, da kayan aikin noma a yankunan da ba na bakin teku ba.
FAQ
Tambaya: Menene ma'anar 'Z40'??
A: Yana nuna 40g / m² na tutiya shafi kowane gefe (jimlar 80g / m²), Ƙidaya da shafi nauyi ga matsakaici lalata muhallin.
Q: Za a iya amfani da karfe na galvanized Z40 a yankunan bakin teku?
A: Ba a ba da shawarar ba don bayyanar bakin teku kai tsaye; mafi girma shafi (Z60-Z275) sun fi dacewa. Z40 ya dace don amfanin cikin gida.
Q: Ta yaya zan fenti galvanized karfe?
A: Yi riga-kafi tare da ma'auni mai arziƙin zinc don tabbatar da mannewa, saboda shimfidar galvanized mai santsi na iya buƙatar abrasion ko etching sinadarai da farko.
Tambaya: Menene bambanci tsakanin zafi-tsoma da electro-galvanized?
A: Hot-tsoma (Z40) Forms wani kauri, karfe bond tare da m texture, yayin da electro-galvanized yana da bakin ciki coatings (10-20g / m²) da kuma santsi surface.
Q: Shin galvanized karfe tsatsa lokacin da yanke?
A: Yanke gefuna suna da rauni; yi amfani da fenti na zinc da aka taɓa taɓawa ko amfani da mahadi masu rufe baki don hana farawar tsatsa.
