|
Adzɔnu ƒe Ŋkɔ .
|
Dɔwɔƒe ƒe asi galvanized sheet .
|
|
Nu
|
DX51D, DX52D, DX53D, DX54D, S350GD, S350GD, S550GD; SGCC, SGCH .
|
|
Titrime .
|
0.12-6.00mm alo asisi ƒe nudidi .
|
|
Kekeme
|
600mm-1500mm, le asisi ƒe nudidi nu
|
|
Zinc si wotsɔ ƒoe .
|
40G-275G/M2.
|
|
ƒomevi si wotsɔ blaa nu .
|
Hot Dipped Galvanized gakpo gbadzɛ .
|
|
Atikewɔwɔ le anyigba dzi .
|
Passivation(c), ami (O), lacquer nutrenu(l), phosphating(p), womewɔ atike o(U)
|
|
Anyigba ƒe wɔwɔme .
|
Normal , dzi ɖe kpɔtɔ , spangle-maɖemaɖe .
|
|
Dzidzenu
|
JIS / ASTM /en/ AISI /GB /BS .
|
|
Aɖaŋu .
|
Hot Rolled / Cold Rolled .
|
|
Dzɔtsoƒe
|
Shandong China .
|
|
Ðaseɖigbalẽwo .
|
API ISO9001-2008,SGS.BV
|
|
Ɣeyiɣi si woatsɔ aɖoe ɖa .
|
Zi geɖe la, le ŋkeke 10-31 me le fexexe do ŋgɔ xɔxɔ vɔ megbe .
|
Kpɔɖeŋu .
0.4mm galvanized steel coil (small/large spangle/no spangle, z180g/z275g) nye nusi wowɔ pɛpɛpɛ-mɔ̃ɖaŋununya si wowɔ na dɔwɔwɔ siwo bia be woawɔ titrime si mewɔa tɔtrɔ o eye woate ŋu atrɔ asi le eŋu. Le ŋkɔ me titrime 0.4mm (tolerance: ±0.01mm), coil sia da sɔ le bɔbɔe ƒe nɔnɔmewo kple mɔ̃ɖaŋu ŋusẽ, esime tiatia spangle (crystalline zinc pattern) alo spangle-maɖemaɖe anyigba dzi la kpɔa dɔwɔwɔ kple atsyɔ̃ɖoɖo ƒe nuhiahiãwo siaa gbɔ.
Woate ŋu akpɔe le nutrenu kpekpewo me (Z180G na Urban, Z275G na Coastal), coil la to hot-dip galvanization deŋgɔ me be woakpɔ egbɔ be zinc adhesion si sɔ kple corrosion te ŋu nɔa te ɖe enu. Wotrɔ asi le 0.4mm gauge la ŋu nyuie na roll-forming ɖe xɔtaxɔwo, gliɖoɖowo, kple mɔ̃a ƒe akpawo me, si naa egbɔkpɔnu si woate ŋu azã le mɔ vovovowo nu na mid-scale fabrication.
Ŋutinuwo
Surface Finish ƒe asitɔtrɔ le nɔnɔmewo ŋu :
Gã spangle : dzɔdzɔme kristalo ƒe nɔnɔme (5-10mm) na ŋgɔyiyi ƒe xɔxlɔ̃ ƒe tsitretsitsi le dɔwɔwɔ siwo woɖe ɖe go me (le kpɔɖeŋu me, gota xɔtaxɔ, nudzraɖoƒewo).
Small spangle : kristalo ƒe wɔwɔme nyui (1-3mm) na xɔxlɔ̃ takpɔkpɔ le ɖoɖo nu kple anyigba ƒe ɖekawɔwɔ si nyo wu na nutata.
No spangle : Smooth, matte finish (RA ≤1.0μm) si sɔ nyuie na atsyɔ̃ɖoɖo ƒe dɔwɔwɔwo, laminations, alo powder coating si le ɖoɖo nu.
Kpekpeɖeŋunu siwo wotsɔna ƒoa nu ɖe nu ŋu ƒe tiatia :
z180g : 180g/m² Zinc coating si sɔ na dugãwo kple dugã godo nɔnɔmewo, kple agbenɔƒe si wogblɔ ɖi be enye ƒe 15-20 eye womalé be nɛ boo o.
z275g : 275g/m² Coating na nɔnɔme sesẽwo (ƒuta, dɔwɔƒe), to gaƒoƒo 1,500+ ƒe dze sisi dodokpɔ me gbeɖuɖɔ dzĩ manɔmee.
Mɔ̃ɖaŋununya si sɔ pɛpɛpɛ :
0.4mm ƒe titrime: Enyo ŋutɔ na akpa siwo hiã be woada asɔ le sesẽ kple nɔnɔme (le kpɔɖeŋu me, corrugated xɔtaxɔewo, curved cladding panels).
Tight width control (±0.5mm) kpɔa egbɔ be wowɔ ɖeka kple agbalẽ xatsaxatsa siwo wozãna ɖaa, siwo ɖea ɣeyiɣi si woɖo ɖi le nuwɔwɔ ƒe mɔnuwo me dzi kpɔtɔna.
Dɔwɔwɔ si me gazazã mele o :
30% si le bɔbɔe wu gakpo si mexɔ dzo o ƒe mɔnu bubuwo, si ɖea ʋuɖoɖo kple eɖoɖo ƒe gazazãwo dzi kpɔtɔna na dɔ gãwo.
Pre-Galvanized Finish ɖea afɔɖeɖe siwo wowɔna le teƒea ɖa, si wɔnɛ be dɔwɔlawo kple nuwo ƒe asixɔxɔ dzi ɖena kpɔtɔna 25%+ ne wotsɔe sɔ kple mɔnu siwo wozãna le ga si wotsɔ ga wɔe megbe.
Mᴐbibia
Roofing & Cladding : wɔa corrugated alo trapezoidal sheets na aƒewo kple asitsaxɔwo, kple Z275G/no spangle combo si naa nɔnɔme si nɔa anyi didina kple egbegbe atsyɔ̃ɖoɖo.
Mɔ̃wo wɔwɔ : Ewɔa xɔtunu siwo le gbadzaa na fridzi, dzodoƒewo, kple range hoods, kple spangle-maɖemaɖe ƒe anyigba si wɔnɛ be woate ŋu atsɔ plastik alo ati ƒe ʋuƒo awɔ lamination si me seamless le.
Ʋuɖoɖo Dɔwɔnuwo : Ewɔa agbatsɔʋuwo ƒe ŋutilã siwo me kɔ, ʋu siwo wotsɔna tsoa xɔdɔmewo me, kple ketekemɔ ƒe ʋu ƒe xɔmenuwo, kple Z180G/Small Spangle si naa ametakpɔnu si ŋu kakaɖedzi le tso mɔdodowo ƒe gbeɖuɖɔwo me.
Metal Art & Design : Esɔ na atsyɔ̃ɖoɖo metalworks, dzesiwo, kple xɔmenuwo, afisi spangle nuwuwu meɖe mɔ ɖe intricate embossing kple vibrant amadede dɔwɔwɔwo.
Nyabiasewo ƒe 1999 me.
Q: Vovototo kae le spangle kple spangle-maɖemaɖe dome le amadede ƒe adhesion gome .?
A: Spangle-maɖemaɖe ƒe anyigbawo naa amadede ƒe adhesion nyuie wu le ƒuƒuiƒe ɖeka ta, esime spangled anyigbawo hiã kekeli abrasion pretreatment hafi emetsonu nyuitɔ kekeake.
Q: Ðe mate ŋu atsaka spangle ƒe nuwuwu le ɖoɖo ɖeka nu .?
A: Ɛ̃, nudɔdɔ siwo wowɔ ɖe ɖoɖo nu ate ŋu anye spangle gã, spangle sue, kple spangle-maɖemaɖe ƒe coils ƒe tsakatsaka, si sɔ nyuie na dɔ siwo hiã anyigbadzidɔdamɔnu vovovowo.
Q: Aleke 0.4mm ƒe titrime wɔa dɔ le teƒe siwo ya ƒona sesĩe le .?
A: Ne wowɔe wòzu corrugated profiles (35mm wave height) la, enɔa te ɖe yaƒoƒo ƒe agba siwo ƒe didime nye 120 mph nu, eye wòdoa go xɔtuɖoɖowo le nuto siwo me ahomya bɔ ɖo me.
Q: Ðe coil la sɔ na kadodo tẽ kple nuɖuɖu bablawo .?
A: Ao, galvanized steel menye nuɖuɖu ƒe dzeside o. Le nuɖuɖu zazã me la, bu tinplate alo gakpo si mexɔ dzo o ŋu kpɔ, gake coil sia sɔ nyuie na dɔwɔƒe siwo menye nuɖuɖu o ƒe agbawo.
