Adzɔnuwo ƒe Ŋgɔdonya
| Adzɔnu ƒe ŋkɔ |
SHANDONG SINO ƑE GAKPƆKPƆ |
| Nusi wowɔ ƒe ŋkɔ |
Ga si Wotsɔ Galvanized Steel Coil Wɔe |
| Nu |
DX51D, DX52D,DX53D, kple bubuawo. |
| Zinc ƒe Nutsyɔtsyɔ |
20-275g/m2 ƒe lolome |
| Eƒe titrime |
0.13-0.8 mm |
| Kekeme |
600-1250 ƒe didime |
| Coil ƒe ID |
508/610mm ƒe didime |
| Coil ƒe kpekpeme |
3-8 tɔn |
| Nu babla |
standard export package (Nɔnɔmetata tsitotsito le ale) |
| Sesẽme |
falɛfalɛ (si sɔ), sesẽ, blibo sesẽ(G300-G550) |
| Dukɔ si me wotso |
China |
| Anyigba ƒe Nɔnɔme |
Zero Spangle ƒe ʋuʋudedi |
Spangle Gã la |
| Zinc si wotsɔ blae ƒe kpekpeme |
Zinc > 20g/sqm ƒe kpekpeme |
Zinc > 30g/sqm ƒe kpekpeme |
Kpɔɖeŋu bliboa
JIS G3302 Compliant DX51D Galvanized Steel Coil nye gaŋutinunya ƒe nuwɔna si wɔa dɔ nyuie si wowɔ na nuwɔwɔ pɛpɛpɛ le dɔwɔƒewo katã, si naa dadasɔ le xɔxlɔ̃ ƒe tsitretsitsi, wɔwɔme, kple mɔ̃ɖaŋununya ƒe tɔtrɔ ɖe nɔnɔmewo ŋu me. Wowɔe ɖe Japantɔwo ƒe Dɔwɔƒewo ƒe Dzidzenu (JIS G3302) nu, eye wotsɔ galvanized si wotsɔ dzoxɔxɔ nyrɔ ɖe eme (SGCC: gakpo si wotsɔ aluminum-zinc ƒo xlãe) ɖe gakpo si me carbon mesɔ gbɔ ɖo o dzi, si ƒe titrime tso 0.11mm va ɖo 2.5mm eye wòle fafɛ (sesẽ blibo) kple sesẽ (sesẽ blibo) siaa me.
DX51D ƒe ŋkɔa fia taɖodzinu si wozãna le mɔ gbadza nu ƒe dzeside si si spangle ƒe anyigba si sɔ le, si sɔ nyuie na dɔwɔwɔ siwo hiã be woawɔe le mɔ si sɔ nu abe babla, lãɖeɖe, kple stamping bɔbɔe ene. Ametakpɔnu evea—zinc-aluminum ƒe kpe si wotsɔ blae (55% Al, 43.4% Zn, 1.6% Si)—na tsitretsitsi ɖe xɔxlɔ̃ ŋu nyuie wu ne wotsɔe sɔ kple zinc dzadzɛ, evɔ dziku si woate ŋu atrɔ asi le (si fa na ductility, sesẽ na ŋusẽ) kpɔa nuwɔwɔ ƒe hiahiã vovovowo gbɔ.
Ŋutinuwo
Dual Temper Versatility : Nusiwo woate ŋu azã le mɔ vovovowo nu :
Soft Temper (Full Hard) : Elongation ≥26%, si sɔ nyuie na nutata goglo, embossing, kple stamping sesẽ (le kpɔɖeŋu me, ʋu ƒe ememe akpawo, mɔ̃a ƒe gowo).
Hard Temper (Spring Hard) : Nuku ƒe ŋusẽ ≥350 MPa, si sɔ na xɔtuɖaŋu ƒe akpa siwo hiã sesẽme gã (le kpɔɖeŋu me, nudzraɖoƒewo, gakpo ƒe xɔtunuwo).
JIS-Compliant Corrosion Takpɔkpɔ :
SGCC ƒe nutsyɔnu (Z60-Z275 g/m²) naa agbenɔƒe didi wu zinc dzadzɛ zi gbɔ zi 3 le teƒe siwo fa miamiamia, eye dze ƒe tsitretsitsi ƒe tsitretsitsi wu gaƒoƒo 1,000 na Z275 ƒe hatsotso.
Nusiwo wòdaa gbe le eɖokui ŋu: Zinc-aluminum ƒe ƒuƒoƒo kpɔa gakpo ta vɔsasa ne wovuvui gɔ̃ hã, si hea gbeɖuɖɔ ƒe wɔwɔ ɖe megbe le go siwo wotso dzi.
Mɔ̃ɖaŋununya si Wowɔna pɛpɛpɛ :
Tight titrime mɔɖeɖe (+/-0.01mm na 0.11-1.0mm; +/-0.02mm na 1.0-2.5mm) kpɔa egbɔ be dɔwɔwɔ ɖekae le automated ewɔwɔ fliwo.
Spangle-maɖemaɖe anyigba tiatia (DX51D + Z) na seamless nutata alo powder nutsyɔtsyɔ, dzidzedzekpɔkpɔ nuwuwu blɔ na dɔ siwo woate ŋu akpɔ.
Dɔwɔwɔ ƒe Dɔwɔwɔ Nyuie :
Wotsɔa wo naa le coil gãwo (tɔn 5-20) me kple slitting si woate ŋu atia vaseɖe kekeme siwo wowɔ ɖe ɖoɖo nu (300mm ya teti), si ɖea gbeɖuɖɔ dzi kpɔtɔna le agbalẽ xatsaxatsa wɔwɔ kple stamping ƒe ɖoɖowo me.
Ami-manɔmee anyigba dzi dɔwɔwɔ na be woate ŋu awɔ welding alo coating enumake evɔ womekɔ do ŋgɔ o, si wɔnɛ be 20%+ dzrana ɖo le preprocessing ɣeyiɣi me.
Mᴐbibia
Mɔ̃wo Wɔwɔ : Ewɔa fridzi ƒe ʋɔtruwo, nufamɔ̃ ƒe kpẽwo, kple yaƒoƒomɔ̃ ƒe ʋuƒo siwo me dziku fafɛ le hena nutata goglo, si wɔnɛ be woƒe anyigbawo le gbadzaa hena enamel ƒe ƒoƒo ɖe wo nɔewo ŋu.
Ga si me kɔ : Ewɔa C/Z purlins, xɔtaxɔwo, kple gli ƒe xɔtunuwo kple dziku sesẽ, si doa alɔ gakpo siwo le bɔbɔe ƒe xɔtunuwo le aƒe siwo wotu do ŋgɔ kple dɔwɔƒewo ƒe xɔdɔmewo me.
Ʋu ƒe Akpawo : Ewɔa ʋɔtru ƒe akpa siwo le eme, ʋua ƒe akpata ƒe nutsyɔnu, kple ʋua te ƒe akpoxɔnuwo, eye SGCC ƒe nutsyɔnu te ŋu nɔa te ɖe mɔ dzi dze kple tsidzadza nu le ƒutanutowo me.
General Fabrication : Enyo ŋutɔ na ga xɔmenuwo, dzesiwo, kple HVAC ductwork, si naa gazazã nyuie ƒe dadasɔ le formability kple gbeɖuɖɔ tsitretsitsi na xɔme/gota zazã.
Nyabiasewo ƒe Nyabiasewo
Q: Aleke mawɔ atia dziku fafɛ kple dziku sesẽ dome?
A: Dziku fafɛ nye na bending/stamping (le kpɔɖeŋu me, curved panels), gake hard temper nye na agba-tsɔtsɔ ƒe akpawo (le kpɔɖeŋu me, structural brackets). Kpɔ míaƒe mɔ̃ɖaŋununya ƒe agbalẽa hena bend radius ƒe mɔfiamewo.
Q: Ðe coil sia sɔ na gota xɔtaxɔea?
A: Ɛ̃, gake wodoe ɖe ŋgɔ va ɖo Z275 SGCC na ƒuta/nuto siwo me fafa le ŋutɔ; tsɔe kpe ɖe polyester topcoat ŋu hena UV ƒe tsitretsitsi ɖe edzi (si li abe subɔsubɔdɔ si ŋu asixɔxɔ le ene).
Q: Vovototo kae le SGCC kple GI (galvanized iron) dome?
A: SGCC (galvanized aluminum-zinc) te ŋu nɔa te ɖe xɔxlɔ̃ nu nyuie wu le teƒe siwo tsi le, gake GI (zinc dzadzɛ) ya mexɔa ga geɖe wu le xɔme zazã ƒuƒu me.
Q: Ðe mate ŋu axɔ mill ɖaseɖigbalẽwo ɖe JIS ƒe sedziwɔwɔ ta?
A: Ẽ, dodokpɔ ŋuti nyatakaka si ɖo kpe atikewo ƒe wɔwɔme, nusi wotsɔ blae ƒe kpekpeme, kple mɔ̃ɖaŋununya ƒe nɔnɔmewo dzi le JIS G3302 ƒe dzidzenuwo nu kpe ɖe coil ɖesiaɖe ŋu.
