Product Introduction

Tinplate is a metal material that is usually coated with a thin layer of tin on the surface of a steel or iron plate after surface treatment.
This coating can improve the corrosion resistance, wear resistance, and corrosion resistance of the material. At the same time, the tin layer can
also make the material have good solderability and processability, making it widely used in the manufacturing of food cans, beverage cans,
cosmetics packaging, pharmaceutical packaging, electronic product shells, and other fields. The thickness of tinplate is usually between
0.1mm-0.5mm, and its surface can be treated differently, such as chrome plating, spraying, printing, etc., to meet different application requirements.

Standard	GB/T ,JIS,ASTM,EN
Material	SPCC,SPHC
Brand	Shandong Great Steel
Thickness	0.1-0.8mm
Width	50-1000 mm
Tolerance	+/-0.01mm
Tin thickness coating	0.005-0.015mm
Surface treatment	Oil film, pickling, phosphating, coating, oxidation
Spangle	Regular spangle,minimal spangle, zero spangle,big spangle
Technique	Electrolytic tin plating and hot dip tin plating
Package	Standard seaworthy export packing: 3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve
Certification	ISO 11949:2012,JIS,ASTM,EN
MOQ	22 TONS (in one 20ft FCL)
Delivery	15-20 days
Monthly Output	30000 tons
Description	Tinplate is a type of metal plate that has undergone tin plating treatment, usually made of steel or iron plate through surface cleaning, pre-treatment, tin coating, and heating processes. It has characteristics such as anti-corrosion, corrosion resistance, and aesthetics. It is widely used in fields such as food packaging, construction, automobiles, electronics, etc.
Payment	T/T, LC, Kun Lun Bank,Western Union, Paypal
Remarks	Insurance is all risks and accept the third party test

Hc67371f0c1dc43879f48663f4404e701k

Temper	Typical Application
T-1	Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter.
T-2	Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can.
T-2.5	Battery shells, small can ends and bodies.
T-3	Top and bottom of cans, can ends and bodies, large diameter closures, crown caps.
T-3.5	General use, pail, 18L, 4L.
T-4	Can bodies and ends, crown caps, closures. Body and end for small can.
T-5	Can ends and bodies requiring intensity. Body and end for small can.
DR-7M	DRD bodies, dome, Lug cap & 3 piece bodies.
DR-8	DRD bodies, end, Lug cap & 3 piece bodies.
DR-8M	DRD bodies, end, Lug cap & 3 piece bodies.
DR-9	DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps.
DR-9M	DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps.
DR-10	DRD bodies, Lug cap & 3 piece bodies. Thinner guage body, end, DRD cans, caps.

未标题-1

1. Tinplate is a type of iron and will rust if exposed to the air.

2. It is prohibited to place liquid items (such as drinks, boiling water, etc.) on the tinplate.

3. When in contact with the tinplate surface, you must wear gloves to prevent scratches or material rust.

4. All tinplate cannot be placed directly on the ground and must be isolated from the ground with wooden frames.

5. Tinplate must be protected from moisture and collision during transportation.

6. It is strictly forbidden to use rolling methods when handling tinplate.

7. If an air compressor is used to feed materials, the gas must be kept dry.

8. The force arm of the feeder must maintain uniform tension.

Tinplate Sheet Hardness 2.8/5.6 T1 T2 T3 T5 Coating Food Grade Packaging Tinplate

Product Category