| Nu |
SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| Titrime . |
0.12-4.0mm . |
| Kekeme |
20-1500mm . |
| Zinc ƒe nutrenu . |
AZ30-200G/M2. |
| Coil ƒe ID . |
508 / 610mm . |
| Coil ƒe kpekpeme . |
3-5tons . |
| Ɣleti sia ɣleti ƒe nusiwo woawɔ . |
50000 tɔn . |
| Fexexe |
T/T, L/C, PayPal, O/A, D/P . |
| Sesẽ . |
Full Hard(HRB85-95) |
| Anyigba ƒe wɔwɔme . |
edziedzi, suetɔ kekeake, zero, gã spangle . |
| Ŋkume |
Tia míaƒe anti-finger deŋgɔ kple classic regular surface windes, siwo wowɔ ɖe ɖoɖo nu be woakpɔ atsyɔ̃ɖoɖo kple dɔwɔwɔ ƒe nuhiahiã vovovowo gbɔ. |
Kpɔɖeŋu .
S350GD Galvalume Steel Coil nye xɔtunu si wɔa dɔ nyuie si wowɔ be wòawɔ ɖe egbegbe xɔtutu ƒe didi sesẽwo dzi, si naa xɔtuɖoɖo ƒe ŋusẽ, yame ƒe nɔnɔme ƒe tsitretsitsi, kple aɖaŋuwɔwɔ ƒe asitɔtrɔ le eŋu ƒe ƒuƒoƒo. Wowɔe tso 55% aluminum-zinc alloy (aluzinc) coating (AZ50-AZ150G) dzi le S350GD ŋusẽ gã gakpo substrate, coil sia sɔ nyuie na agba-tsɔtsɔ xɔta, cladding, kple xɔtuɖoɖowo le asitsaƒewo, dɔwɔƒewo, kple aƒewo dɔwo.
Woate ŋu akpɔe le titrime tso 0.3mm va ɖo 1.5mm eye kekeme si ade 1250mm, coil la nye spangle alo spangle-maɖemaɖe ƒe anyigba ƒe nuwuwu, si sɔ kple roll-forming, lãɖeɖe, kple welding dɔwɔwɔwo. S350GD ƒe dzeside (si nye thell strength ≥350 MPa) kpɔa egbɔ be wowɔ dɔ si ŋu kakaɖedzi le le ya sesẽ kple anyigbaʋuʋu ƒe teƒewo, esime galvalume ƒe nutrenu kpɔa ametakpɔkpɔ si nɔa anyi didi tso xɔxlɔ̃ kple UV ƒe gbegblẽ me.
Ŋutinuwo
Structural Grade ƒe dɔwɔwɔ :
S350GD Steel Substrate: Enaa ŋusẽ ƒe ŋusẽ si de ŋgɔ wu ne wotsɔe sɔ kple dzidzenu siwo woɖo ɖi, si ɖea nusiwo ƒe titrime hiã na xɔtaxɔ gãwo dzi kpɔtɔna eye wodzraa 15%+ ɖo le ɖoɖowɔɖi ƒe gazazãwo me.
Ya sesẽ ƒe tsitretsitsi: Wodoe kpɔ be wòate ŋu anɔ te ɖe ya ƒe agba siwo ƒe sesẽme nye 160 km/h (100 mph) nu ne woblae nyuie, eye woɖoa xɔtusewo gbɔ le nuto siwo me ahom sesẽ le (le kpɔɖeŋu me, Florida, Japan) me.
Enhanced Corrosion Protection :
Aluzinc ƒe nutrenu ƒe tiatiawɔblɔɖe :
AZ50: Na xɔme/nudzraɖoƒe ƒe dɔbiagbalẽviwo (50g/m², ƒe 10 ƒe agbe).
AZ150: Na ƒuta/dɔwɔƒewo ƒe nutowo (150g/m², ƒe 30+ ƒe agbe kple beléle na).
Self-haya oxide layer: Aluminium-si me aluminum-nutsyɔnu wɔa ametakpɔnu film si ɖɔa nu suesuesuewo ƒe gbegblẽ, si hea gbeɖuɖɔ wɔwɔ ɖe megbe le cut edges kple fastener holes.
Xɔtuɖaŋu-xɔlɔ̃wɔwɔ ƒe nɔnɔme :
Kpekpeme si le bɔbɔe: 0.5mm ƒe titrime ƒe kpekpeme nye 3.9kg/m², 50% le bɔbɔe wu kɔkrit tile, si ɖea ʋuɖoɖo kple eɖoɖo ƒe gazazãwo dzi kpɔtɔna.
Interlocking profile compatibility: Ewɔa dɔ kple standard trapezoidal, corrugated, kple standing seam roofing systems, si wɔnɛ be woate ŋu aɖoe kabakaba kple clip-lock alo screw-down mɔnuwo.
Aɖaŋuwɔwɔ & Nusiwo Li Eteƒe Didi :
Pre-Paint Ready: Smooth surface xɔa polyester, PVDF, alo silicone coatings hena amadede ƒe tɔtrɔ (ral/Pantone matching si li).
100% Recycable: Ga kple aluzinc layerwo nye esiwo woate ŋu azã bliboe le woƒe agbenɔɣi ƒe nuwuwu, si kpena ɖe LEED ƒe gaxɔgbalẽviwo ŋu na xɔtudɔ siwo me womezãa agblemenukuwo le o.
Mᴐbibia
Commercial Roofing : Wozãnɛ le ɔfisxɔwo me, asitsaƒewo, kple kamedefefewɔƒewo, eye AZ100 ƒe nutsyɔnu nɔa te ɖe dugã me ɖiƒoƒo kple UV ƒe ɖeɖefia le teƒe siwo kɔkɔ ŋutɔ nu.
Industrial Cladding : kpɔa dɔwɔƒewo, nudzraɖoƒewo, kple elektrikŋusẽdɔwɔƒewo ta tso atikewo ƒe dodo kple tsidzadza gãwo me, kple amadede siwo do viviti wu (le kpɔɖeŋu me, RAL 7016) si ɣla ɖiƒoƒo ɖe teƒe siwo woƒo ɖii le.
Aƒewo tutu : Enyo ŋutɔ na xɔwo ƒe xɔtaxɔwo kple dugã me xɔwo ƒe xɔmetsovɔ, si me woate ŋu atsɔ beléle si mebɔ o aɖo anyi ɖe anyikpe siwo ƒe amadedewo woate ŋu atrɔ asi le be woatsɔ asɔ kple xɔtuɖaŋu ƒe atsyãwo.
Infrastructure Projects : Wowɔa xɔtaxɔwo na yameʋudzeƒewo, ketekedzeƒewo, kple tɔdzisasrãwo, si ƒoa S350GD ƒe ŋusẽ kple AZ150 ƒe xɔxlɔ̃ nu le gota nɔnɔme sesẽwo me.
Nya siwo wobiaa ame bubuwo .
Q: Nukae nye kpekpeme si wokafu be woatsɔ atsyɔ ƒuta xɔ aɖe dzi .?
A: AZ150G/M⊃2; sɔ nyuie na ƒutaduwo, si naa ametakpɔnu si sɔ gbɔ wu tso dze si wotsɔna ƒua gbe la me; Tsɔe kpe ɖe PVDF Topcoat ŋu hena ƒe 20+ ƒe amadedewo léle ɖe asi.
Q: Ðe woate ŋu azã coil sia na agbatsɔtsɔ ƒe gli ƒe xɔtunuwo .?
A: Ɛ̃, S350GD substrate la ɖo EN 10143 ƒe xɔtuɖoɖo ƒe dzidzenuwo gbɔ na gakpo siwo wowɔ fafɛe, siwo sɔ na gli siwo dzi agba le le xɔ siwo me dziƒoxɔ geɖe le me.
Q: Aleke Galvalume wɔa dɔ le nuto siwo me dzoxɔxɔ le ŋutɔ me .?
A: Aluzinc coating te ŋu nɔa te ɖe 450°C nu, si wɔe be wòsɔ na nuto siwo me dzoxɔxɔ sesẽ (le kpɔɖeŋu me, dzogbewo) evɔ womegblẽa nu le xɔxlɔ̃ ƒe tsitretsitsi ŋu o.
Q: Vovototo kae le spangle kple spangle-maɖemaɖe dome hena xɔtutu .?
A: Spangled surfaces te ŋu nɔa te ɖe xɔxlɔ̃ nu nyuie wu na xɔtaxɔe si woɖe ɖe go, gake Spangle-maɖemaɖe naa wowua enu nyuie wu na nutsyɔnu si wota si bia be wòadze ɖeka.
