| Kayan abu |
SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| Kauri |
0.12-4.0mm |
| Nisa |
20-1500 mm |
| Tufafin Zinc |
Saukewa: AZ30-200G/M2 |
| ID na coil |
508/610mm |
| Nauyin Coil |
Ton 3-5 |
| Fitowar wata-wata |
50000 ton |
| Biya |
T/T, L/C, Paypal, O/A, D/P |
| Tauri |
Cikakken wuya (HRB85-95) |
| Tsarin saman |
Na yau da kullun, Mafi ƙarancin, Zero, Babban spangle |
| Surface |
Zaɓi tsakanin ƙaƙƙarfan ƙaƙƙarfan yatsanmu da na yau da kullun na gama-gari na yau da kullun, wanda aka keɓance don biyan buƙatun ƙaya da ayyuka daban-daban. |
Dubawa
S350GD Galvalume Karfe Coil babban kayan gini ne wanda aka ƙera don biyan buƙatun gini na zamani, yana ba da haɗin ƙarfin tsari, juriyar yanayi, da sassauƙar ƙira. Ya ƙunshi 55% aluminum-zinc alloy (Aluzinc) shafi (AZ50-AZ150g) a kan S350GD babban ƙarfin ƙarfe mai ƙarfi, wannan coil ɗin yana da kyau don yin rufi mai ɗaukar nauyi, cladding, da sassa na tsarin kasuwanci, masana'antu, da ayyukan zama.
Akwai shi a cikin kauri daga 0.3mm zuwa 1.5mm da nisa har zuwa 1250mm, coil ɗin yana da fasalin spangle ko ƙarewar ƙasa mara kyau, wanda ya dace da yin nadi, yanke, da hanyoyin walda. S350GD nadi (ƙarfin samar da ≥350 MPa) yana tabbatar da ingantaccen aiki a cikin manyan iska da yankuna masu girgiza, yayin da murfin galvalume yana ba da kariya mai dorewa daga lalata da lalata UV.
Siffofin
Ayyukan Matsayin Tsari :
S350GD Karfe Substrate: Yana ba da ƙarfin yawan amfanin ƙasa idan aka kwatanta da daidaitattun maki, rage buƙatun kauri don manyan rufin da adana 15%+ a cikin farashin tsarin.
Babban Juriya na Iska: An gwada don jure wa nauyin iskar 160 km/h (100 mph) lokacin da aka ɗaure da kyau, haɗuwa da lambobin gini a yankuna masu saurin guguwa (misali, Florida, Japan).
Ingantattun Kariyar Lalacewa :
Zaɓuɓɓukan Rufe Aluzinc :
AZ50: Don aikace-aikacen cikin gida / ajiya (50g / m², rayuwar shekaru 10).
AZ150: Don yankunan bakin teku / masana'antu (150g / m², 30 + shekara rayuwa tare da kulawa).
Layer Oxide Mai Warkar da Kai: Rubutun Aluminum yana samar da fim mai kariya wanda ke gyara ƙananan lalacewa, jinkirta samuwar tsatsa a kan yanke gefuna da ramuka mai ɗaure.
Zane-Abokin Gina :
Hasken nauyi: 0.5mm kauri yana auna 3.9kg/m², 50% ya fi sauƙi fiye da tiles na kankare, rage farashin sufuri da shigarwa.
Daidaituwar Bayanan Bayanin Haɗin Kai: Yana aiki tare da daidaitaccen tsarin trapezoidal, corrugated, da tsarin rufin kabu na tsaye, yana ba da damar shigarwa cikin sauri tare da kulle-kulle ko hanyoyin dunƙulewa.
Zane & Dorewa :
Pre-Paint Shirye: Smooth surface yana karɓar polyester, PVDF, ko silicone coatings don keɓance launi (RAL/Pantone matching samuwa).
Maimaituwa 100%: Karfe da Aluzinc yadudduka ana iya sake yin su gaba ɗaya a ƙarshen rayuwa, suna ba da gudummawa ga ƙimar LEED don ayyukan ginin kore.
Aikace-aikace
Roofing Commercial : Ana amfani da shi a cikin ɗakunan ofis, kantunan kasuwa, da wuraren wasanni, tare da AZ100 shafi yana tsayayya da gurɓataccen birni da bayyanar UV a cikin manyan wurare masu tasowa.
Rufe masana'antu : Yana kare masana'antu, ɗakunan ajiya, da masana'antar wutar lantarki daga hayakin sinadarai da ruwan sama mai yawa, tare da launuka masu duhu (misali, RAL 7016) suna ɓoye datti a cikin gurɓatattun wurare.
Gine-ginen Gidaje : Madaidaici don rufin villa da ƙwanƙwasa gidan gari, yana ba da madadin ƙarancin kulawa ga fale-falen yumbu tare da launuka masu iya canzawa don dacewa da tsarin gine-gine.
Ayyukan Kayan Aiki : Siffofin yin rufi don filayen jirgin sama, tashoshin jirgin ƙasa, da gadoji, haɗa ƙarfin S350GD tare da juriya na lalata AZ150 a cikin matsanancin yanayi na waje.
FAQ
Tambaya: Mene ne shawarar da aka ba da shawarar yin rufi don wani villa na bakin teku?
A: AZ150g/m² yana da kyau ga yankunan bakin teku, yana samar da iyakar kariya daga fesa gishiri; Haɗa tare da rigar PVDF na tsawon shekaru 20+ na riƙe launi.
Tambaya: Shin ana iya amfani da wannan coil ɗin don firam ɗin bango mai ɗaukar kaya?
A: Ee, S350GD substrate ya sadu da ka'idodin tsarin EN 10143 don ƙirar ƙarfe mai sanyi, wanda ya dace da bango mai ɗaukar nauyi a cikin gine-ginen gidaje da yawa.
Tambaya: Yaya galvalume ke yin aiki a yankuna masu zafi?
A: Aluzinc shafi yana tsayayya har zuwa 450 ° C, yana sa ya dace da yankuna da matsanancin zafi (misali, hamada) ba tare da lalata juriya na lalata ba.
Tambaya: Menene bambanci tsakanin spangle da spangle-free don ginawa?
A: Filayen da aka ɗora suna da mafi kyawun juriya ga rufin rufin da aka fallasa, yayin da ba tare da spangle ba yana ba da ƙarancin ƙarewa don fentin fentin da ke buƙatar bayyanar iri ɗaya.
