Gabatarwar Samfur
| Sunan alama |
SHANDONG SINO KARFE |
| Sunan samfur |
Galvanized Karfe Coil |
| Kayan abu |
DX51D, DX52D, DX53D, ect. |
| Tufafin Zinc |
20-275g/m2 |
| Kauri |
0.13-0.8 mm |
| Nisa |
600-1250 mm |
| ID na coil |
508/610 mm |
| Nauyin nada |
3-8 ton |
| Kunshin |
daidaitaccen kunshin fitarwa (Hoton dalla-dalla shine kamar haka) |
| Tauri |
taushi (na al'ada), mai wuya, cikakken wuya (G300-G550) |
| Ƙasar asali |
China |
| Tsarin Sama |
Sifili Spangle |
Babban Spangle |
| Nauyin suturar zinc |
Zinc> 20g/sqm |
Zinc> 30g/sqm |
Dubawa
JIS G3302 Compliant DX51D Galvanized Karfe Coil babban samfuri ne na ƙarfe wanda aka ƙera don ƙirƙira daidaitattun masana'antu, yana ba da ma'auni na juriya na lalata, tsari, da daidaitawar injina. An ƙera shi zuwa Matsayin Masana'antu na Jafananci (JIS G3302), wannan coil ɗin yana fasalta rufin galvanized mai zafi mai zafi (SGCC: karfe galvanized tare da aluminum-zinc gami) akan ƙaramin ƙarfe mai ƙarancin carbon, yana samuwa a cikin kauri daga 0.11mm zuwa 2.5mm kuma a cikin duka taushi (cikakken wuya) da wuya (ƙaramar bazara).
Nadi na DX51D yana nuna maƙasudi na gaba ɗaya tare da saman spangle na al'ada, manufa don aikace-aikacen da ke buƙatar matsakaicin tsari kamar lankwasawa, yanke, da tambari mai sauƙi. Dual m Layer-zinc-aluminum alloy shafi (55% Al, 43.4% Zn, 1.6% Si) - samar da m lalata juriya idan aka kwatanta da tsarki tutiya, yayin da customizable fushi (laushi ga ductility, wuya ga ƙarfi) caters zuwa bambancin masana'antu bukatun.
Siffofin
Yawan Haushi Biyu :
Soft Temper (Cikakken Hard) : Tsawaita ≥26%, manufa don zane mai zurfi, embossing, da hadaddun hatimi (misali, bangarori na ciki na mota, bawo na kayan aiki).
Hard Temper (Spring Hard) : Ƙarfin Haɓaka ≥350 MPa, wanda ya dace da sassan tsarin da ke buƙatar babban ƙarfi (misali, akwatunan ajiya, firam ɗin ƙarfe).
JIS - Kariyar Lalacewa :
SGCC shafi (Z60-Z275 g/m²) yana ba da 3x tsawon rai fiye da tutiya mai tsabta a cikin mahalli mai laushi, tare da juriya na feshin gishiri wanda ya wuce sa'o'i 1,000 don darajar Z275.
Kaddarorin warkar da kai: Layer na zinc-aluminum yana yin sadaukarwa yana ba da kariya ga ƙarfe koda lokacin da aka toshe shi, yana jinkirta samuwar tsatsa a kan gefuna da aka yanke.
Daidaitaccen Injiniya :
Haƙuri mai kauri (+/- 0.01mm don 0.11-1.0mm; +/- 0.02mm don 1.0-2.5mm) yana tabbatar da aiki iri ɗaya a cikin layin samarwa mai sarrafa kansa.
Zaɓin saman da ba shi da spangle (DX51D+Z) don zanen da ba shi da kyau ko shafa foda, samun kyakkyawan gamawa don aikace-aikacen bayyane.
Ingantaccen Tsari :
An ba da shi a cikin manyan coils (ton 5-20) tare da tsaga zaɓi na zaɓi zuwa faɗin al'ada (mafi ƙarancin 300mm), rage sharar gida a cikin tsarin naɗa da tambari.
Maganin saman da ba shi da mai yana ba da damar walda ko shafi kai tsaye ba tare da share-tsaye ba, adana 20%+ a cikin lokacin aiwatarwa.
Aikace-aikace
Manufacturing kayan aiki : Forms ƙofofin firiji, ganguna na injin wanki, da kwandon kwandishan tare da zafi mai laushi don zane mai zurfi, yana tabbatar da santsi don manne enamel.
Hasken Ƙarfe Gina : Fabricates C/Z purlins, rufaffiyar rufin, da ginshiƙan bango tare da tsananin fushi, suna tallafawa tsarin ƙarfe mara nauyi a cikin gidajen da aka riga aka shirya da kuma zubar da masana'antu.
Kayan Aikin Mota : Yana samar da fatunan ciki na kofa, murfi na akwati, da garkuwar jiki, tare da suturar SGCC da ke tsayayya da gishiri da danshi hanya a yankunan bakin teku.
Gabaɗaya Fabrication : Mafi dacewa don kayan ƙarfe na ƙarfe, sigina, da ductwork na HVAC, suna ba da ma'auni mai fa'ida mai tsada na tsari da juriya na tsatsa don amfanin gida / waje.
FAQ
Tambaya: Ta yaya zan zaɓa tsakanin taushi da zafin rai?
A: Taushi mai laushi shine don lankwasa/tambayi (misali, bangarori masu lanƙwasa), yayin da zafin fushi shine sassa masu ɗaukar kaya (misali, braket ɗin tsari). Tuntuɓi takardar fasahar mu don jagororin radius lanƙwasa.
Tambaya: Shin wannan coil ɗin ya dace da rufin waje?
A: Ee, amma haɓakawa zuwa Z275 SGCC don yankunan bakin teku / high-humidity; biyu tare da rigar polyester don ingantacciyar juriya ta UV (samuwa azaman sabis na ƙara darajar).
Q: Mene ne bambanci tsakanin SGCC da GI (galvanized baƙin ƙarfe)?
A: SGCC (galvanized aluminum-zinc) yana da mafi kyawun juriya na lalata a cikin yanayin rigar, yayin da GI (zinc mai tsabta) ya fi dacewa don amfani da gida mai bushe.
Tambaya: Zan iya samun takaddun niƙa don bin JIS?
A: Ee, kowane nada yana tare da rahoton gwaji yana tabbatar da abun da ke tattare da sinadarai, nauyin sutura, da kaddarorin injina bisa ka'idojin JIS G3302.
