Introdyushɔn fɔ di Prodak
| Brand nem |
SHANDONG SINO STIL WE DE DU |
| Di nem fɔ di prɔdak |
Galvaniz Stiɛl Kɔyl |
| Tin dɛn |
DX51D, DX52D,DX53D,ɛkt. |
| Zink Kɔtin fɔ Kɔt |
20-275g/m2 na di 20-275g |
| Tik we i tik |
0,13-0,8 mm |
| Wayd |
600-1250 mm |
| Koil ID fɔ di kɔyl |
508/610mm we yu kin yuz |
| Weyt fɔ di kɔyl |
3-8 tan dɛn |
| Bɔks |
standad ɛkspɔt pakej (Ditayl pikchɔ na lɛk dis) |
| Di at we pɔsin kin gɛt |
sɔft (nɔmal), at, ful had(G300-G550) |
| Di kɔntri usay dɛn kɔmɔt |
Chaina |
| Strɔkchɔ we de na di wɔl |
Ziro Spangle we nɔ gɛt wan bɔt |
Big Spangle na big wan |
| Weyt fɔ di zink kɔtin |
Zink > 20g/sqm |
Zink > 30g/sqm |
Ovaviu fɔ di tin dɛn we dɛn dɔn lan
Di JIS G3302 Compliant DX51D Galvanized Steel Coil na wan ay-pafɔmɛnshɔn mɛtalɔjik prodak we dɛn mek fɔ prɛsishɔn fabrikeshɔn akɔdin to industri dɛm, we de gi balans fɔ kɔrɛshɔn rɛsistɛns, fɔmabiliti, ɛn mɛkanikal adaptabiliti. Dɛn mek am to Japanese Industrial Standard (JIS G3302), dis kɔyl gɛt hot-dipped galvanized coating (SGCC: stɛl galvanized wit aluminium-zinc alloy) pan wan low-carbon steel sabstret, we de insay tiknes frɔm 0.11mm to 2.5mm ɛn insay ɔl tu di saf (ful had) ɛn had (spring had) temper.
Di DX51D designation indiket wan jenɛral-pɔpɔs gred wit nɔmal spangle surface, ideal fɔ aplikeshɔn dɛn we nid mɔdaret fɔm lɛk fɔ bɛnd, kɔt, ɛn simpul stamp. Di dual protɛktiv layt—zink-aluminum alɔy kɔtin (55% Al, 43.4% Zn, 1.6% Si)—de gi spɛshal kɔrɛshɔn rɛsistɛns kɔmpia to klin zink, we di kɔstɔmayz tɛma (sɔft fɔ daktiliti, at fɔ trɛnk) de kia fɔ difrɛn manufakchurin nid dɛn.
Tin dɛn
Dual Temper Versatility we yu kin yuz : .
Soft Temper (Full Hard) : Elongation ≥26%, i fayn fɔ dip drɔin, ɛmbos, ɛn kɔmpleks stamp (ɛgz., ɔtomotiv inana panɛl, aplayans shel).
Hard Temper (Spring Hard) : Yield strength ≥350 MPa, we fit fɔ strɔkchɔral kɔmpɔnɛnt dɛn we nid ay rigiditi (ɛgz., stɔrɔj rɛk, stɛl frem).
JIS-Kɔmpliant Kɔrɛshɔn Protɛkshɔn :
SGCC kotin (Z60-Z275 g/m²) de gi 3x lɔng layf pas pure zinc na humid envayrɔmɛnt, wit sɔl sprɛy rɛsistɛns we pas 1,000 awa fɔ Z275 gred.
Self-healing propertys: Zinc-aluminum layer sakrifays fɔ protɛkt stɛl ivin we i skrach, we de delay fɔ mek rɔst na di ed dɛn we dɛn kɔt.
Prɛsishɔn Ɛnjinia : .
Tayt tiknes tolerans (+/-0.01mm fɔ 0.11-1.0mm; +/-0.02mm fɔ 1.0-2.5mm) de mek shɔ se yunifom pefɔmɛns insay ɔtomatik prodakshɔn layn dɛn.
Spangle-fri surface opshɔn (DX51D+Z) fɔ simlɛs peint ɔ paoda kɔtin, we de ajɔst wan smol finish fɔ aplikeshɔn dɛn we pɔsin kin si.
Prɔses Efisiɛns : .
Dɛn de saplae am insay big kɔyl dɛn (5-20 tan) wit opshɔnal slit to kɔstɔm wit (minimum 300mm), we de ridyus west insay rol-fɔm ɛn stamp prɔses.
Oil-fri surface treatment de mek yu ebul fɔ wɛldin ɔ kɔt kwik kwik wan we yu nɔ klin am bifo tɛm, we de sev 20%+ insay prɛprosɛsin tɛm.
Aplay fɔm
Aplayans Manufacturing : I de fɔm frij domɔt, was mashin drɔm, ɛn ay kɔndishɔn panɛl wit sɔft tɛm fɔ dip drɔ, fɔ mek shɔ se di say dɛn we smol smol fɔ mek di ɛnamel adhesion.
Layt Stilin Kɔnstrɔkshɔn : I de mek C/Z purlin, ruf trɔs, ɛn wɔl stɔd wit had tɛm, we de sɔpɔt laytwɛt stɛl fremwɔk dɛn na prɛfab os ɛn industrial shed dɛn.
Ɔtomotiv Kɔmpɔnɛnt dɛn : I de mek domɔt insay panɛl, trɔnk lid, ɛn ɔndabɔdi shild, wit SGCC kɔtin we de rɛsist rod sɔl ɛn mɔstɔ na di kɔstal rijyɔn dɛn.
Jɛnɛral Fabrikeshɔn : I fayn fɔ mɛtal fɔnicha, sayn, ɛn HVAC dakt wok, we de gi wan kɔst-ɛfɛktiv balans fɔ fɔmabiliti ɛn rɔst rɛsistɛns fɔ yuz insay/ɔda.
FAQ we dɛn kin aks
K: Aw a go pik bitwin saf ɛn had wamat?
A: Sɔft tɛma na fɔ bɛnd/stamp (ɛgz., kɔba panɛl dɛn), we had tɛma na fɔ pat dɛn we de bia lod (ɛgz., strɔkchɔral brakɛt dɛn). Konsul wi teknikol sheet fo bend radius gaydlain.
K: Dis koyl fit fo outdoor ruf?
A: Yes, bɔt ɔpgrɛd to Z275 SGCC fɔ kɔstal/hay-humidity zon; pe wit wan polyester topkot fכ εnhans UV rεsistεns (we de as valyu-adεd savis).
K: Wetin na di difrɛns bitwin SGCC ɛn GI (galvanized iron)?
A: SGCC (galvanized aluminium-zinc) gɛt bɛtɛ kɔrɛshɔn rɛsistɛns na wet ɛnvayrɔmɛnt, we GI (pure zinc) na mɔ kɔst-ɛfɛktiv fɔ yuz dray insay os.
K: A kin gɛt mil sɛtifiket fɔ JIS kɔmplians?
A: Yes, ɛni kɔyl de wit wan tɛst ripɔt we de chɛk di kemikal kɔmpɔzishɔn, di wet we dɛn de kɔt, ɛn di mɛkanikal prɔpati dɛn we di JIS G3302 standad dɛn gɛt.
