| Minɛ |
SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| A ka bon kosɛbɛ |
0,12-4,0mm ye |
| Jayan |
20-1500mm ye |
| Zɛnki dacogo |
AZ30-200G/M2 ye |
| Bobine ID ye |
508 / 610mm ye |
| Bobine girinya |
3-5Tonw ye |
| Kalo o kalo bɔli |
tɔni 50000 ye |
| Sarali |
T/T, L/C, Paypal, O/A, D/P, ani mɔgɔw ye baara kɛ ni u ye |
| Gɛlɛya |
A ka gɛlɛn(HRB85-95) |
| Surface (yɔrɔ) jɔcogo |
Regular, Minimum, Zero, Spangle belebele |
| Kɛnɛ |
Sugandili kɛ an ka Anti-finger finiw ni klasiki Regular Surface finiw cɛ, minnu dilannen don walasa ka ɲɛnajɛ ni baarakɛcogo mago suguya caman ɲɛ. |
Kuma bɛɛ lajɛlen
S350GD Galvalume Steel Coil ye boon jɔlifɛn ye min bɛ baara kɛ kosɛbɛ, min dilannen don walasa ka bi jɔli ɲinini gɛlɛnw dafa, a bɛ jɔli fanga, waati kunbɛnni, ani dilancogo sɛgɛsɛgɛli faralen ɲɔgɔn kan. A dilannen don ni 55% aluminiyɔmu-zinki sɔgɔlen (Aluzinc) dacogo ye (AZ50-AZ150g) nɛgɛso barikama S350GD kan, nin bobine in ka ɲi kosɛbɛ doni ta so sanfɛlan, finimugu, ani jɔli yɔrɔw la jago, izini ani sigiyɔrɔ porozɛw la.
A bɛ sɔrɔ a janya la k’a ta milimɛtɛrɛ 0,3 na ka se milimɛtɛrɛ 1,5 ma ani a bonya bɛ se milimɛtɛrɛ 1250 ma, o bobine in bɛ kɛ ni spangle walima spangle-free surface finish ye, min bɛ bɛn roll-forming, cutting ani welding processes ma. S350GD tɔgɔladon (sɛnɛ fanga ≥350 MPa) bɛ baarakɛcogo dafalen sabati fiɲɛba ni dugukoloyɛrɛyɛrɛ yɔrɔw la, ka sɔrɔ galvalume dacogo bɛ lakanani di min bɛ mɛn senna ka bɔ sɔgɔsɔgɔninjɛ ni UV tiɲɛni na.
Suguya
Structural Grade Baarakɛcogo : 1 .
S350GD Steel Substrate: A bɛ sɔrɔ fanga di min ka fisa ni a bɛ tali kɛ grades standards la, o bɛ dɔ bɔ fɛnw janya wajibiyalenw na so sanfɛlanw na minnu ka bon ani ka 15%+ bɔ karamɔgɔ musakaw la.
Fiɲɛ kunbɛnni ka bon: A kɔrɔbɔra ka fiɲɛ doni muɲu kilomɛtɛrɛ 160 kɔnɔ ni a sirilen don ka ɲɛ, ka sow jɔcogo sariyaw dafa yɔrɔw la, sanfiɲɛba bɛ se ka don yɔrɔ minnu na (misali la, Floride, Japon).
Kɔrɔsili lakanani min bɛ bonya : .
Aluzinc Coating Sugandiliw : 1 .
AZ50 : Ka kɛɲɛ ni so kɔnɔ/marayɔrɔw ye (50g/m², san 10 ɲɛnamaya).
AZ150: Kɔgɔjida/sɛnɛyɔrɔw kama (150g/m², san 30+ ɲɛnamaya ni ladonni).
Okisizɛni min bɛ a yɛrɛ kɛnɛya: Aluminiyɔmu bɛ fɛn min na, o bɛ kɛ sababu ye ka filimu lakananen dɔ dilan min bɛ tiɲɛni misɛnninw dilan, ka nɔgɔ bɔli bila kɔfɛ tigɛlenw ni sirilanw dingɛw kan.
Dilan min bɛ kɛ ka ɲɛsin jɔli ma :
A ka nɔgɔn: 0,5mm janya bɛ kilogaramu 3,9/m², a ka nɔgɔn 50% ka tɛmɛ bɛton tile kan, o bɛ dɔ bɔ bolifɛnw ni sigili musakaw la.
Interlocking Profile Compatibility: A bɛ baara kɛ ni trapezoidal, corrugated ani standing seam roofing systems standards ye, o bɛ se ka kɛ sababu ye ka a sigi teliya la ni clip-lock walima screw-down fɛɛrɛw ye.
Design & Sustainability : Bamako :
Pre-Pint Ready: Yɔrɔ nɔgɔlen bɛ sɔn poliyesitɛri, PVDF walima silikɔni finiw ma walasa ka kulɛriw kɛ ka kɛɲɛ ni u yɛrɛ sago ye (RAL/Pantone bɛnkan bɛ sɔrɔ).
100% Recyclable : Nɛgɛ ni Aluzinc layɛrɛw bɛ se ka segin ka kɛ fɛn wɛrɛw ye pewu u si laban na, o bɛ kɛ sababu ye ka LEED ka juruw di boon jɔli porozɛw ma minnu bɛ kɛ ni jiri ye.
Waleyali
Jagokɛyɔrɔw sanfɛla : A bɛ kɛ birow kɔnɔ, sannikɛyɔrɔw la, ani farikoloɲɛnajɛyɔrɔw la, ni AZ100 dacogo bɛ dugu nɔgɔli ni UV bɔli kɛlɛ sanfɛyɔrɔw la.
Industri Cladding : A bɛ iziniw, fɛnmarayɔrɔw, ani kuran feerelaw tanga kemikɛlifɛnw bɔli ma ani sanjiba ma, ni kulɛri dibimanw (misali la, RAL 7016) bɛ nɔgɔ dogo yɔrɔ nɔgɔlenw na.
Sigida jɔli : A ka ɲi kosɛbɛ vila sanfɛlanw ni dugu sow datugucogo la, a bɛ ladonni dɔgɔyali fɛɛrɛ wɛrɛ di bɔgɔdaga nɔ na ni kulɛriw ye minnu bɛ se ka ladilan walasa ka bɛn fɛn dilanni cogoyaw ma.
Infrastructure Projects : A bɛ so sanfɛlanw dilan awiyɔnbonda, tɛrɛn gariw, ani bɔrɔw kama, ka S350GD fanga ni AZ150 sɔgɔli kunbɛnni fara ɲɔgɔn kan kɛnɛyako gɛlɛnw na.
Ɲininkaliw
J: Kɔgɔjida la vila ka finimugu girinya min bɛ fɔ?
A: AZ150g/m⊃2 ye; a ka ɲi kɔgɔjida laminiw ma, a bɛ mɔgɔ tanga kosɛbɛ kɔgɔ fiyɛli ma; pair ni PVDF sanfɛlan ye san 20+ kulɛri marali kama.
J: Yala nin bobine in bɛ se ka kɛ doni ta kogow ye wa?
A: Ɔwɔ, S350GD substrat bɛ EN 10143 sigicogo sariyaw dafa nɛgɛdaga nɛnɛma na, min bɛnnen don doni ta kogow ma sow kɔnɔ minnu bɛ sankanso caman kɔnɔ.
J: Galvalume bɛ baara kɛ cogo di yɔrɔw la minnu funteni ka bon?
A: Aluzinki dacogo bɛ se ka 450°C muɲu, o b’a to a bɛnnen don maraw ma minnu funteni ka bon kosɛbɛ (misali la, kungodaw) k’a sɔrɔ a ma sɔgɔsɔgɔninjɛ kunbɛncogo tiɲɛ.
J: Danfara jumɛn bɛ spangle ni spangle-free cɛ jɔli kama?
A: Spangled surfaces bɛ se ka sɔgɔsɔgɔ ka ɲɛ so sanfɛla la min bɛ kɛnɛ kan, k’a sɔrɔ spangle-free bɛ fini nɔgɔlen di finimugu pentalenw ma min bɛ a ɲini ka kɛ cogo kelen na.
