| Mea waiwai |
SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| mānoanoa |
0.12-4.0mm |
| Laulā |
20-1500mm |
| ʻO ka uhi zinc |
AZ30-200G/M2 |
| Coil ID |
508 / 610mm |
| Kaumaha Coil |
3-5Tona |
| Hua mahina |
50000 tona |
| Uku |
T/T, L/C, Paypal, O/A, D/P |
| ʻoʻoleʻa |
Paʻa piha (HRB85-95) |
| ʻO ka ʻili o ka ʻili |
Maʻa mau, liʻiliʻi, Zero, spangle nui |
| Ili |
E koho i waena o kā mākou Anti-finger maʻamau a me nā mea hoʻopau maʻamau maʻamau, i hana ʻia e hālāwai me nā pono aesthetic a me nā pono hana. |
Nānā nui
ʻO ka S350GD Galvalume Steel Coil he mea hale hana kiʻekiʻe i hana ʻia no ka hoʻokō ʻana i nā koi koʻikoʻi o ke kūkulu hou ʻana, e hāʻawi ana i ka hui pū ʻana o ka ikaika kūkulu, ke kū ʻana o ka wā, a me ka hoʻolālā hoʻolālā. Hoʻokumu ʻia me ka 55% alumini-zinc alloy (Aluzinc) coating (AZ50-AZ150g) ma kahi S350GD kiʻekiʻe-ikaika kila substrate, ua kūpono kēia coil no ka hoʻouka ʻana i ka hale, ka uhi ʻana, a me nā mea hana i nā papahana kalepa, ʻoihana, a me nā hale noho.
Loaʻa i nā mānoanoa mai 0.3mm a 1.5mm a me nā laula a hiki i 1250mm, ʻike ʻia ka coil i kahi spangle a i ʻole spangle-free surface finish, kūpono me nā kaʻina hana roll-forming, ʻokiʻoki, a me nā kaʻina hana kuʻi. ʻO ka inoa S350GD (ka ikaika hua ≥350 MPa) e hōʻoiaʻiʻo i ka hana hilinaʻi ma nā wahi makani kiʻekiʻe a me nā seismic, ʻoiai ʻo ka galvalume coating e hāʻawi i ka pale mau loa mai ka corrosion a me ka degradation UV.
Nā hiʻohiʻona
Hana Papa Hana :
S350GD Steel Substrate: Hāʻawi i ka ikaika hua maikaʻi i hoʻohālikelike ʻia i nā māka maʻamau, e hōʻemi ana i nā koi mānoanoa mea no nā hale ākea nui a mālama i ka 15% + i nā kumukūʻai hoʻolālā.
Kū'ē Makani Kiʻekiʻe: Hoʻāʻo ʻia e kū i nā hawewe makani he 160 km/h (100 mph) ke hoʻopaʻa pono ʻia, e hālāwai me nā code kūkulu hale ma nā ʻāpana ʻino (e laʻa, Florida, Iapana).
Hoʻonui i ka pale ʻino :
Koho Aluzinc Coating :
AZ50: No nā noi i loko / mālama (50g/m², 10-makahiki ola).
AZ150: No nā ʻāpana kahakai/ʻoihana (150g/m², 30+ makahiki ola me ka mālama ʻana).
ʻO ka Layer Oxide Hoʻōla Pono: ʻO ka uhi waiwai nui o ka alumini he kiʻi pale e hoʻoponopono i nā pōʻino liʻiliʻi, e hoʻopaneʻe ana i ka hoʻokumu ʻana o ka ʻōpala ma nā ʻaoʻao i ʻoki ʻia a me nā puka paʻa.
Hoʻolālā-Friendly Design :
Māmā: 0.5mm mānoanoa ke kaupaona ʻana he 3.9kg/m², 50% ʻoi aku ka māmā ma mua o nā tile palaki, e hōʻemi ana i ka lawe ʻana a me nā kumukūʻai hoʻokomo.
Hoʻopili i ka pilina pili: hana me nā ʻōnaehana trapezoidal maʻamau, corrugated, a me ke kū ʻana o nā ʻōnaehana seam roofing, hiki i ka hoʻokomo wikiwiki ʻana me nā ʻano paʻa paʻa a i ʻole nā hoʻololi.
Hoʻolālā & Hoʻomau :
Mākaukau Pre-Paint: E ʻae ka ʻili maʻemaʻe i ka polyester, PVDF, a i ʻole silicone coatings no ka hoʻoponopono kala (RAL/Pantone ka hoʻohālikelike ʻia).
100% Recyclable: Hiki ke hoʻohana hou ʻia nā papa kila a me Aluzinc i ka hopena o ke ola, e hāʻawi ana i nā hōʻaiʻē LEED no nā papahana hale ʻōmaʻomaʻo.
Palapala noi
Hoʻohana ʻia i nā hale keʻena , nā hale kūʻai kūʻai, a me nā kahua haʻuki, me ka uhi ʻana o AZ100 e kūʻē i ka pollution kūlanakauhale a me ka hoʻolaha ʻana o UV i nā wahi kiʻekiʻe.
Pākuʻi ʻOihana : Mālama i nā hale hana, nā hale kūʻai, a me nā mea kanu mana mai nā hoʻokuʻu kemika a me ka ua nui, me nā waihoʻoluʻu ʻeleʻele (e like me RAL 7016) huna lepo i nā wahi haumia.
Ka Hale Noho : He kūpono no nā hale villa a me ka uhi ʻana o ke kaona, e hāʻawi ana i kahi ʻokoʻa haʻahaʻa haʻahaʻa i nā tile pālolo me nā waihoʻoluʻu hiki ke hoʻohālikelike i nā ʻano hana.
Nā Papahana Infrastructure : Hoʻokumu i ka hale no nā mokulele, nā kahua kaʻaahi, a me nā alahaka, e hui pū ana i ka ikaika S350GD me ka AZ150 corrosion resistance i nā kūlana koʻikoʻi o waho.
FAQ
Q: He aha ke kaumaha o ka uhi ʻia ʻana no kahi villa kahakai?
A: AZ150g/m² he kūpono no nā wahi kahakai, e hāʻawi ana i ka pale nui loa mai ka paʻakai paʻakai; e hui pū me kahi kapa PVDF no 20+ mau makahiki o ka mālama kala.
Nīnau: Hiki ke hoʻohana ʻia kēia coil no nā pā paʻa ukana?
A: ʻAe, hoʻokō ka substrate S350GD i nā kūlana hoʻolālā EN 10143 no ka hoʻoheheʻe ʻia ʻana o ke kila anuanu, kūpono i nā paia e kau ana i ka ukana ma nā hale he nui.
Nīnau: Pehea ka hana ʻana o ka galvalume ma nā wahi wela kiʻekiʻe?
A: ʻO ka uhi ʻana o Aluzinc ke kūpaʻa a hiki i 450 ° C, kūpono ia i nā wahi me ka wela loa (e laʻa, nā wao nahele) me ka ʻole o ka pale ʻana i ka corrosion.
Q: He aha ka ʻokoʻa ma waena o ka spangle a me ka spangle-free no ke kūkulu ʻana?
A: ʻOi aku ka maikaʻi o ka pale ʻana i ka corrosion o nā ʻili ʻāʻī no ka hale i ʻike ʻia, ʻoiai hāʻawi ʻia ka spangle-free i kahi hoʻopau maʻemaʻe no ka pale pena e pono ai ke ʻano like.
