| Lintho tse bonahalang |
SGCC, SGCH, G350, G450, G550, DX51D, DX52D, DX53D |
| Botenya |
0.12-4.0mm |
| Bophara |
20-1500 limilimithara |
| Ho roala zinki |
AZ30-200G/M2 |
| Coil ID |
508/610 limilimithara |
| Boima ba Coil |
Lithane tse 3-5 |
| Sephetho sa Khoeli le Khoeli |
50000 lithane |
| Tefo |
T/T, L/C, Paypal, O/A, D/P |
| Ho thatafala |
Ka thata ka botlalo(HRB85-95) |
| Sebopeho sa bokahodimo |
Kamehla, Bonyane, Zero, Spangle e kholo |
| Bokaholimo |
Khetha pakeng tsa li-Anti-finger tsa rona tse tsoetseng pele le tsa khale tsa Regular Surface, tse etselitsoeng ho fihlela litlhoko tse fapaneng tsa botle le ts'ebetso. |
Kakaretso
S350GD Galvalume Steel Coil ke thepa ea moaho e sebetsang hantle haholo e etselitsoeng ho fihlela litlhoko tse tiileng tsa kaho ea sejoale-joale, e fanang ka motsoako oa matla a sebopeho, ho hanyetsa boemo ba leholimo le maemo a meralo. E entsoe ka 55% ea aluminium-zinc alloy (Aluzinc) coating (AZ50-AZ150g) holim'a substrate ea tšepe e matla e phahameng ea S350GD, coil ena e loketse bakeng sa ho roala moroalo, ho koahela le likarolo tsa moralo mererong ea khoebo, ea indasteri le ea bolulo.
E fumaneha ka botenya ho tloha ho 0.3mm ho isa ho 1.5mm le bophara ho fihla ho 1250mm, coil e na le sebaka se se nang spangle kapa se se nang spangle, se tsamaellanang le lits'ebetso tsa ho etsa roll, ho itšeha le ho tjheseletsa. Tlhaloso ea S350GD (matla a lihlahisoa ≥350 MPa) e tiisa ts'ebetso e ka tšeptjoang libakeng tse nang le moea o matla le oa litšisinyeho tsa lefatše, ha seaparo sa galvalume se fana ka tšireletso ea nako e telele khahlanong le kutu le ho senyeha ha UV.
Likaroloana
Ts'ebetso ea Kereiti ea Sebopeho :
S350GD Steel Substrate: E fana ka matla a phahameng a chai ha e bapisoa le limaraka tse tloaelehileng, e fokotsa litlhoko tsa botenya ba thepa bakeng sa marulelo a maholo le ho boloka 15%+ ka litšenyehelo tsa moralo.
Phefo e Matla: E lekoa ho mamella meroalo ea moea ea 160 km/h (100 mph) ha e tlanngoe ka nepo, e kopana le likhoutu tsa meaho libakeng tse nang le maholiotsoana (mohlala, Florida, Japan).
Tšireletso e Matlafalitsoeng ea Corrosion :
Likhetho tsa ho roala ka Aluzinc :
AZ50: Bakeng sa lisebelisoa tsa ka tlung/polokelo (50g/m², bophelo ba lilemo tse 10).
AZ150: Bakeng sa libaka tse lebopong la leoatle/liindasteri (150g/m², bophelo ba lilemo tse 30+ ka tlhokomelo).
Self-Healing Oxide Layer: Ho roala ka aluminium ho etsa filimi e sireletsang e lokisang tšenyo e nyenyane, e liehisang ho thehoa ha mafome metseng e sehiloeng le masoba a fastening.
Moralo o Sebeletsang Kaho :
Boima bo bobebe: botenya ba 0.5mm bo boima ba 3.9kg/m², 50% e bobebe ho feta lithaele tsa konkreite, e fokotsa litšenyehelo tsa lipalangoang le tsa ho kenya.
Interlocking Profile Compatibility: E sebetsa ka mekhoa e tloaelehileng ea marulelo a trapezoidal, e entsoeng ka masenke, le e emeng, e nolofalletsang ho kenngoa ka potlako ka mekhoa ea ho koala kapa ea sekoti.
Moralo le Moshoelella :
Penta e Itokisitse esale Pele: Bokaholimo bo boreleli bo amohela polyester, PVDF, kapa litlolo tsa silicone bakeng sa ho etsa mebala (RAL/Pantone matching e fumaneha).
100% Recyclable: Mekhahlelo ea tšepe le ea Aluzinc e sebelisoa ka ho feletseng qetellong ea bophelo, e tlatsetsa ho likoloto tsa LEED bakeng sa merero ea kaho e tala.
Kopo
Marulelo a Khoebo : E sebelisoa meahong ea liofisi, mabenkeleng a mabenkele le mabaleng a lipapali, e nang le AZ100 e hanela tšilafalo ea litoropo le ho pepeseha ha mahlaseli a kotsi libakeng tse phahameng.
Indasteri Cladding : E sireletsa lifeme, libaka tsa polokelo, le lifeme tsa motlakase ho tsoa mesing ea lik'hemik'hale le lipula tse matla, tse nang le mebala e lefifi (mohlala, RAL 7016) e patang litšila libakeng tse silafetseng.
Kaho ea Bolulo : E loketse marulelo a matlo a matlo le meaho ea teropo, e fanang ka mokhoa o mong oa tlhokomelo e tlase ho lithaele tsa letsopa tse nang le mebala e ikhethileng ho tsamaisana le mekhoa ea meralo.
Merero ea Meaho : E theha marulelo bakeng sa boema-fofane, liteishene tsa literene le marokho, ho kopanya matla a S350GD le AZ150 ho hanyetsa ha kutu maemong a thata a kantle.
LBH
P: Ke boima bofe bo khothalelitsoeng bakeng sa villa e lebopong la leoatle?
A: AZ150g/m² e loketse libaka tse lebōpong la leoatle, e fana ka tšireletso e phahameng khahlanong le ho fafatsa letsoai; e kopane le topcoat ea PVDF bakeng sa lilemo tse 20+ tsa ho boloka mebala.
P: Na khoele ee e ka sebelisoa bakeng sa liforeimi tsa marako tse nang le meroalo?
A: E, substrate ea S350GD e kopana le litekanyetso tsa EN 10143 tsa meralo ea tšepe e entsoeng ka serame, e loketseng marako a nang le meroalo mehahong e nang le mekato e mengata.
P: galvalume e sebetsa joang libakeng tse nang le mocheso o phahameng?
A: Ho roala ha Aluzinc ho mamella ho fihlela ho 450 ° C, ho etsa hore e loketse libaka tse nang le mocheso o feteletseng (mohlala, mahoatateng) ntle le ho senya ho hanyetsa ha kutu.
P: Phapano ke efe pakeng tsa spangle le spangle-free bakeng sa kaho?
A: Libaka tse pentiloeng li na le matla a ho thibela kutu bakeng sa marulelo a pepenene, athe a se nang spangle a fana ka pheletso e boreleli bakeng sa masela a pentiloeng a hlokang ponahalo e tšoanang.
