| Samfura |
Aluminum Launi Mai Rufe Coil |
| Dukiya |
Anti-lalata, Heat Resistant |
| Surface |
Coil Mai Rufi |
| Tsarin samarwa |
Cold Rolled, Hot Rolled |
| Diamita na Ciki |
300mm, 405mm, 505mm ko kowace bukata |
| Haushi |
O,H14,H24,H32,H112 da dai sauransu;T4,T651 da dai sauransu |
| Kauri |
0.3mm - 60mm |
| Nisa |
600mm - 2600mm |
| Nauyin Coil |
2-4 tons |
| MOQ |
7 ton (bisa ga ƙayyadaddun bayanai) |
| Lokacin Biyan Kuɗi |
TT, LC, WestUnion |
| Kunshin |
Fitar da pallets na katako, takarda sana'a, wakili mai hana blushing. |
| Lokacin Bayarwa |
Kayayyakin gaba: 15-20 kwanakin aiki, Shirye-shiryen Hannu: 7-10 kwanaki. |
| Ingancin Material |
Gabaɗaya ba tare da lahani kamar farin tsatsa, alamun jujjuyawa, lalacewa ba, camber, haƙora, ramuka, layukan karya, scratches kuma ba tare da saita nada ba. |
| Hankali mai kyau |
Ana iya keɓance ƙayyadaddun ƙayyadaddun bayanai azaman buƙatun abokin ciniki. |
Bayanin Samfura
Prepainted Aluminum Alloy Coils and Sheets, samuwa a cikin PPGI (Polyester), PPGL (PVDF), PE (Polyethylene), da PVDF (Polyvinylidene Fluoride), kayan gini ne na kayan gini masu mahimmanci waɗanda ke haɗa ƙarfin nauyi na aluminum tare da kariya da kyawawan fa'idodin riga-kafi na kayan kwalliyar gargajiya. Kerarre daga gami jerin kamar 3003 (aluminum-manganese) ko 5005 (aluminum-magnesium), da substrate yayi kyau kwarai lalata juriya da formability. Tsarin sutura ya haɗa da raguwa, murfin juyawa na chromate (don mannewa), da abin nadi-rufi na Layer Layer. PE coatings (20-30μm) samar da kyau general-manufa kariya, yayin da PVDF coatings (25-40μm) bayar da m UV juriya da sinadaran karko. Akwai a cikin nisa har zuwa 1500mm da kauri 0.2-2.0mm, waɗannan coils / zanen gado suna kula da manyan aikace-aikacen gine-gine da masana'antu.
Siffofin
Juriya na Musamman na Yanayi : PVDF shafi (misali, Kynar 500®) suna kula da launi da sheki don shekaru 20+, yana sa su dace da yanayin wurare masu zafi ko yanayin bakin teku, yayin da suturar PE tana ba da shekaru 10-15 na aiki.
Haske & Ƙarfi : Girman Aluminum (2.7g / cm ⊃3;) shine kashi ɗaya bisa uku na ƙarfe, rage nauyin tsarin aiki yayin da yake kiyaye ƙarfin 100-250MPa (dangane da gami).
Sassautun ƙira : Faɗin launi, gami da ƙarewar ƙarfe da lu'u-lu'u, da kayan kwalliyar zaɓi na zaɓi (stucco, hatsin itace) don ƙirar gine-gine.
Lalata Immunity : Aluminum ta halitta oxide Layer, hade tare da shafi, bayar da juriya ga gishiri fesa, 酸雨, da yanayi gurbatawa, kawar da bukatar akai-akai kiyayewa.
Ƙarfafawar thermal : Abubuwan PVDF suna tsayayya da yanayin zafi har zuwa 150 ° C, yayin da kayan aikin PE suna aiki da kyau har zuwa 100 ° C, dace da aikace-aikace tare da matsakaicin zafi mai zafi.
Aikace-aikace
Facades na Gine-gine : Ana amfani da shi don bangon labule, rufin ruwan sama, da kayan ado a cikin gine-ginen kasuwanci, filayen jiragen sama, da filin wasa, inda kayan ado na dorewa suna da mahimmanci.
Sufuri : Yana kera jikin motar bas, cikin jirgin ƙasa, da abubuwan haɗin jirgi saboda nauyi mai nauyi da juriya na wuta (aluminum ba mai ƙonewa bane).
Solar & HVAC : Mafi dacewa don firam ɗin hasken rana, ducting na iska, da abubuwan radiyo masu buƙatar juriya na lalata da haɓakar thermal.
Aikace-aikacen ruwa : Ya dace da cikin jirgin ruwa, dandamali na teku, da gine-ginen bakin teku inda juriya na gishiri ya kasance mafi mahimmanci (PVDF-coated 5052 alloy).
FAQ
Q: Menene bambanci tsakanin PE da PVDF shafi?
A: PVDF yana ba da mafi girman juriya na UV, riƙe launi, da juriya na sinadarai, yana sa ya fi tsada amma ya dace da yanayi mai tsauri, yayin da PE yana da tsada don amfanin gabaɗaya.
Tambaya: Shin ana iya walda wa annan zanen gado?
A: Ee, amma ana buƙatar cire sutura a wuraren walda, kuma bayan-weld taɓawa tare da fenti mai dacewa ya zama dole.
Tambaya: Ta yaya zan tsaftace zanen aluminum da aka riga aka rigaya?
A: Yi amfani da goge-goge mai laushi da kayan wanka na tsaka tsaki; guje wa masu tsabtace abrasive ko wanka mai ƙarfi wanda zai iya lalata rufin.
Tambaya: Wane irin allo zan zaɓa don aikace-aikacen ruwa?
A: 5052 ko 5083 aluminum-magnesium alloys tare da PVDF shafi suna ba da mafi kyawun juriya na ruwan gishiri.
Tambaya: Za a iya keɓance coils don takamaiman girman aikin?
A: Ee, muna ba da sabis na tsagawa da yanke-zuwa-tsawon don saduwa da ƙayyadaddun ƙayyadaddun ayyuka, tare da mafi ƙarancin tsari.
