|
Daraja
|
SGCC/DC51D/DX51D/DX52D/SGSS/SGCD1/SGCD2/SGCD3
|
|
Kauri
|
0.12-3.5 mm
|
|
Nisa
|
A matsayin abokin ciniki's request
|
|
Spangle
|
na yau da kullun / mini / babba / sifili spangle
|
|
Tufafin Zinc
|
30 ~ 275G/M2
|
|
Tauri
|
Mai taushi (HRB60), matsakaita mai wuya (HRB60-85), cikakken tauri (HRB85-95)
|
|
Tsawon
|
na yau da kullun / mini / babba / sifili spangle
|
|
Shiryawa
|
Daidaitaccen marufin fitarwa na teku
|
|
Bayarwa
|
A cikin kwanaki 7-15
|
|
Oda na yau da kullun
|
Ton 25 ko ganga ɗaya, don ƙarancin yawa, don tuntuɓar mu don cikakkun bayanai
|
|
Yawan aiki
|
Ton 20000 a wata
|
Dubawa
Rubutun Ƙarfe Mai Dumama Mai Dufi Mai Dufi (DX51D/DX52D/DX54D) samfuri ne na ƙarfe da aka ƙera don saduwa da bambancin ƙirƙira da buƙatun juriya na ƙirƙira na zamani. Akwai a cikin nau'o'in DX guda uku-DX51D (manufa ta gaba ɗaya), DX52D (zane mai zurfi), da DX54D (zane mai zurfi) - wannan takarda yana da siffar tutiya mai zafi mai zafi (Z60-Z275g) akan ƙananan ƙarfe na carbon, daidaitawa ductility, ƙarfi, da kariya ga tsatsa don aikace-aikace daban-daban.
Kerarre zuwa kasa da kasa matsayin (ASTM A653, EN 10143), da takardar yana samuwa a cikin kauri daga 0.3mm zuwa 3.0mm kuma girma har zuwa 3000x1500mm, tare da spangle ko spangle-free surface ƙare. Tsarin zafi mai zafi yana tabbatar da wani nau'i mai nau'i wanda ya dace da karfe, yana ba da kariya mai dorewa a cikin gida da waje.
Siffofin
Maki don Kowane Ƙirƙira Bukatar :
DX51D (Manufa Gabaɗaya) : Ya dace da sauƙin lankwasawa da yankan (lanƙwasa radius: 2x kauri), manufa don maƙallan, shelves, da sigina (misali, IKEA raka'a shelving karfe).
DX52D (Zane Mai Zurfi) : Babban ductility (tsawaitawa: ≥26%) don matsakaicin tambari, ana amfani da su a cikin fa'idodin kayan aiki (misali, kofofin firiji na LG) da sassan ciki na mota (misali, madaidaicin dashboard na Ford).
DX54D (Extra-Deep Drawing) : Matsakaicin tsari (tsawaitawa: ≥34%) don hadaddun sifofi kamar tankunan mai (misali, shingen baturi na Tesla) da bangarorin ƙofar abin hawa (misali, jikin motar BMW).
Kariyar Lalacewa Na Musamman :
Z60-Z120 : Don mahalli na cikin gida/bushe (misali, rakiyar uwar garken, wuraren lantarki), bayar da kariya ta asali a farashin tattalin arziki.
Z180-Z275 : Don yanayin waje / m (misali, rufi, kwantena na ruwa), tare da Z275 yana ba da 2x tsawon rai fiye da Z180 a yankunan bakin teku (misali, gine-ginen masana'antu na Singapore).
Zaɓuɓɓukan Ƙarshen Sama :
Saman Fasa : Tsarin kristal na halitta don haɓaka juriya na lalata a aikace-aikacen fallasa (misali, rufin kwantena na jigilar kaya, tankunan ajiya na waje).
Surface-Free Spangle : Ƙarƙasa mai laushi don zane, shafa foda, ko amfani da kayan ado, samun kamanni iri ɗaya a aikace-aikacen ganuwa (misali, nunin kantin sayar da kayayyaki, kayan gini).
Daidaitaccen Injiniya :
Haƙuri mai kauri (+/- 0.02mm) da kula da kwanciyar hankali (≤5mm/m) suna tabbatar da daidaiton aiki a cikin layukan ƙirƙira na atomatik (misali, ƙwayoyin hatimin mutum-mutumi).
Ƙwararren ƙwanƙwasa (deburred da zagaye) yana rage haɗarin lalacewa yayin sarrafawa, inganta aminci da ingantaccen tsari.
Aikace-aikace
Gabaɗaya Fabrication : Siffofin ƙira, racks, da mafita na ajiya tare da DX51D, haɗa sauƙin yankewa / lankwasawa tare da kariyar tsatsa ta asali don amfanin cikin gida (misali, ɗakunan ajiya na Amazon).
Manufacturing Kayan Aiki : Yana amfani da DX52D don buga kofofin firiji, ganguna na injin wanki, da kwandon kwandishan, yana buƙatar matsakaicin tsari da santsi (misali, samar da kayan aikin Whirlpool).
Masana'antar Kera Mota : Yana ɗaukar DX54D don zurfin zane na fatunan jikin mota, fenders, da huluna, tare da rufin Z180 da ke ba da kariya daga tarkacen titi da danshi (misali, kera motar Toyota).
Gina & Rufa : Yana amfani da zanen Z275 mai rufaffiyar aikace-aikace na waje kamar rufaffiyar rufi (misali, rumfunan gonaki na Australiya), sutura, da tallafi na tsari a cikin yankuna masu tsananin ɗanɗano (misali, gidajen zama na Florida).
FAQ
Tambaya: Ta yaya zan tantance madaidaicin darajar DX don aiwatar da tambari na?
A: Yi amfani da DX51D don sauƙaƙan lanƙwasa (misali, kusurwoyi 90°), DX52D don madaidaitan lanƙwasa, da DX54D don hadaddun sifofi tare da radis masu kaifi (misali, sassaukan yanayi).
Tambaya: Ana iya amfani da waɗannan zanen gado a cikin yanayin zafi mai zafi har zuwa 300 ° C?
A: Tufafin zinc sun kasance barga har zuwa 200 ° C; don 200-300 ° C, la'akari da galvalume (AZ100) ko madadin bakin karfe don hana zinc oxidation.
Tambaya: Menene bambanci tsakanin zanen gadon galvanized 'mai zafi-mai zafi' da 'mai sanyi'?
A: Zane-zanen da aka yi da zafi (ƙananan ƙasa) sun fi dacewa da farashi don ma'auni mai kauri da kuma amfani da tsarin; sanyi-birgima (mai laushi mai laushi) sun dace don daidaitaccen tambari da aikace-aikacen ado.
Tambaya: Shin waɗannan zanen gado suna buƙatar fiddawa kafin murfin foda?
A: Ana ba da shawarar firam mai arzikin zinc don mannewa mafi kyau, musamman a kan saman spangled; wannan yana haɓaka juriya na lalata don yanke gefuna da ramukan fastener.
